Novel photoresist enables 3D printing of smallest porous structures

image

IMAGE: Color change: The right microcylinder printed with the novel photoresist appears white, because light is scattered in its sponge-like structure, whereas the cylinder printed with conventional photoresist appears transparent. (Figure:…
view more 

Credit: Figure: 3DMM2O

Researchers of Karlsruhe Institute of Technology (KIT) and Heidelberg University have developed a photoresist for two-photon microprinting. It has now been used for the first time to produce three-dimensional polymer microstructures with cavities in the nano range. In Advanced Materials, the scientists involved in the joint Cluster of Excellence 3D Matter Made to Order report how porosity can be controlled during printing and how this affects light scattering properties of the microstructures. (DOI: 10.1002/adma.202002044)

Photoresists are printing inks used to print smallest microstructures in three dimensions by so-called two-photon lithography. During printing, a laser beam is moved in all spatial directions through the initially liquid photoresist. The photoresist hardens in the focal point of the laser beam only. Little by little, complex microstructures can be built in this way. In a second step, a solvent is used to remove those areas that were not exposed to radiation. Complex polymer architectures in the micrometer and nanometer ranges remain.

Two-photon polymerization – or two-photon microprinting based on this process – has been studied extensively for some years now, in particular as regards the production of microoptics, so-called metamaterials, and microscaffolds for experiments with single biological cells. To expand the spectrum of applications, new printable materials are required. This is the point of departure of the scientists involved in the Cluster of Excellence 3D Matter Made to Order (3DMM2O) of KIT and Heidelberg University. “With the help of conventional photoresists, it was possible to print transparent, glassy polymers only,” says Frederik Mayer, physicist of KIT and main author of the study. “Our new photoresist for the first time enables printing of 3D microstructures from porous nanofoam. This polymer foam has cavities of 30 to 100 nm in size, which are filled with air.”

From Transparent to White

“There has never been a photoresist for 3D laser microprinting, with which “white” material can be printed,” Frederik Mayer points out. As in a porous eggshell, the many small air holes in the porous nanoarchitectures make them appear white. Mixing white particles into a conventional photoresist would not have this effect, because the photoresist must be transparent for the (red) laser beam during printing. “Our photoresist,” Mayer says, “is transparent prior to printing, but the printed objects are white and have a high reflectivity.” The researchers from Karlsruhe and Heidelberg demonstrated this by printing an Ulbricht ball (an optical component) as fine as a hair.

Another factor that opens up new applications is the extremely large internal surface area of the porous material. It might be useful for filtration processes on smallest space, highly water-repellent coatings, or the cultivation of biological cells.

The collaboration of three of the nine research thrusts of the Cluster of Excellence revealed the uses for which the novel photoresist is suited and how it can be applied in the best possible way. By means of electron microscopy scans and optical experiments, researchers showed how the cavities are distributed in printed structures and how their formation can be controlled by varying the printing parameters and in particular the intensity of the laser pulses. Work in the cluster of excellence was carried out by materials scientists from Heidelberg University as well as chemists and physicists from KIT.

###

Cluster of Excellence 3D Matter Made to Order

In the Cluster of Excellence 3D Matter Made to Order (3DMM2O), scientists of Karlsruhe Institute of Technology and Heidelberg University conduct interdisciplinary research into innovative technologies and materials for digital scalable additive manufacture to enhance the precision, speed, and performance of 3D printing. Work is aimed at completely digitizing 3D manufacture and materials processing from the molecule to the microstructure. In addition to funding as a cluster of excellence under the Excellence Strategy competition launched by the federation and the federal states, 3DMM3O is financed by Carl Zeiss Foundation.

More information: http://www.3dmm2o.de

Original Publication:

F. Mayer, D. Ryklin, I. Wacker, R. Curticean, M. ?alkovský, A. Niemeyer, Z. Dong, P. A. Levkin, D. Gerthsen, R. R. Schröder, M. Wegener: 3D Two?Photon Microprinting of Nanoporous Architectures. Advanced Materials 2020, https://doi.org/10.1002/adma.202002044

Press contact:

Justus Hartlieb

Press Officer

Phone: +49 721 608-41155

Email: justus.hartlieb@kit.edu

Ruperto Carola founded in 1386 is an internationally oriented research university, whose spectrum of subjects covers the humanities, social sciences, law, as well as natural and life sciences including medicine. Its leading role in German science is reflected by its successes in the excellence competitions – it is one of the German Universities of Excellence – as well as by international rankings. Heidelberg University seeks to further develop outstanding individual disciplines, strengthen interdisciplinary cooperation, and transfer its research findings to society. The about 30,000 students are offered research-based studies in more than 180 study programs with a large variety of subject combinations and individual qualification paths.

Being “The Research University in the Helmholtz Association,” KIT creates and imparts knowledge for the society and the environment. It is the objective to make significant contributions to the global challenges in the fields of energy, mobility and information. For this, about 9,300 employees cooperate in a broad range of disciplines in natural sciences, engineering sciences, economics, and the humanities and social sciences. KIT prepares its 24,400 students for responsible tasks in society, industry, and science by offering research-based study programs. Innovation efforts at KIT build a bridge between important scientific findings and their application for the benefit of society, economic prosperity, and the preservation of our natural basis of life. KIT is one of the German universities of excellence.

This press release is available on the internet at http://www.sek.kit.edu/english/press_office.php.

Disclaimer: AAAS and EurekAlert! are not responsible for the accuracy of news releases posted to EurekAlert! by contributing institutions or for the use of any information through the EurekAlert system.

Products You May Like

Articles You May Like

Onward: Magical fantasy to be released on Disney+
Reviewing the quantum material ‘engine room’, QAHE
Engineers produce a fisheye lens that’s completely flat
Doom Patrol: Season Three announced
What happens between the sheets?

Leave a Reply

Your email address will not be published. Required fields are marked *